Electronics Line 3208GLD Manuale Utente Scaricare il pdf (Pagina 16)

Menu Selections Using the LCD Keypad

To make a menu selection from the menu:

1. Press MENU/NEXT; the main menu will be displayed and the selection pointed to by >.

2. Press MENU/NEXT to scroll through the menu items. Pressing “Q“scrolls backwards and pressing any

numeric key displays that number’s associated menu item. To abort at any time, press AWAY.

3. Press SELECT to select the displayed menu item (indicated by the arrow). Certain menu items may require

an authorized passcode.

Example:

Selection Display

Pressing MENU/NEXT for the first time displays >1 OPEN / DISARM

NEXT. . .

Pressing MENU/NEXT displays the next menu item in the

same menu:

>2 CLOSE / ARM

NEXT. . .

Pressing SELECT when the CLOSE/ARM menu is selected

displays

>21 PERIM ARM

NEXT. . .

Note: The selection numbers are the direct command numbers for specific menu items. These com-

mands can be performed without having to scroll through the menus. For further information, refer to

the direct command operating procedure.

Main Menu

1 - DISARM 421 - WALK TEST 7 - PROG.

2 - ARM 422 - BELL TEST 71 - MANUAL PROGRAMMING

21 - PERIMETER ARM 423 - TELEPHONE TEST 72 - LOAD DEFAULT PROG. #1

22 - NORMAL ARM 425 - SYSTEM TEST 73 - LOAD DEFAULT PROG. #2

23 - LATE TO CLOSE 426 - BATTERY TEST 74 - REMOTE PROGRAMMING

3 - BYPASS 43 - FIRE SENSOR RESET 741 - OFF HOOK

31 - BYPASS ZONE 44 - BELL CANCEL 742 - CALLBACK

32 - UNBYPASS ZONE 45 - STOP COMMUNICATIONS 8 - AUX RELAY

33 - CHIME ON 46 - FOLLOW ME 83 - RESET RELAY

34 - CHIME OFF 5 - USER CODES 84 - SET RELAY

39 - UNBYPASS ALL 6 - VIEW/LOG 9 - ACCESS CONTROL

4 - SERVICE 61 - VIEW LOG

41 - SET TIME & DATE 62 - CLEAR LOG

42 - TEST 64 - SHOW VERSIONS

3.5: Arming/Disarming

Arming & Disarming

To arm the system:

• Press AWAY to arm both the perimeter and interior or STAY to arm the perimeter only; the Armed LED

lights up to indicate that the system is armed.

The system can also be armed by entering an authorized passcode or by selecting one of the arming options

from the Arm menu.

To disarm the system:

• Enter an authorized passcode. If the system is in alarm, entering an authorized passcode will disarm the

system and terminate the alarm.

Forced Arming

Forced arming enables the user to arm the system even if all zones are not secured. If zones are still not

secured after the exit delay has ended, an alarm will be generated. The ability to force arm the system is

optional and is selected at address 494.

Note: Electronics Line recommends waiting until all of the zones are secured and the system can be

armed normally.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 50 51

Commenti su questo manuale

Nessun commento

Electronics Line 3208GLD Manuale Utente Pagina 16

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Electronics Line 3208GLD