Electronics Line 3208GLD Manuale Utente Scaricare il pdf (Pagina 14)

Keys and Keypad Functions

0 - 9: The numeric keys are used to enter user codes, telephone numbers, to issue commands and for numeric

programming.

Q , #: These keys are used in programming the control panel. Pressing the Q key during the exit delay cancels

the delay, immediately arming the system. On the LCD keypad, the Q key is used for scrolling back during

operation and programming. The # key is used for entering hexadecimal digits (A - F) during programming.

MENU/NEXT: On the LCD keypad, pressing the MENU/NEXT key displays the main menu and is used to scroll

through the menu items. On both the LCD and LED keypads the MENU/NEXT key is used to log in an arrival

when using the latch key feature. Additionally, the MENU/NEXT key generates an emergency alarm when held

down simultaneously with one of the distress keys (E, F or P).

SELECT: Pressing SELECT followed by a command code causes a system function to occur. On the LCD

keypad, pressing this key when a menu is open results in the selection of the menu item.

STAY: Pressing STAY, when the system is ready to arm, arms only the system's perimeter zones.

AWAY: Pressing the AWAY key, when the system is ready to arm, arms both the perimeter and interior zones.

On the LCD keypad, pressing AWAY returns the display back to the main menu when scrolling or

programming.

Note: If one-key arming is enabled, the user can arm the system using the STAY and AWAY keys

without having to enter a user code.

3.3: System Status Displays

On the LED keypad system status is displayed using the eight zone LEDs as well as the Ready, Program,

Bypass and Trouble LEDs. LEDs 1 - 8 represent alarm situations from the corresponding zone. The other LEDs

show if the system is ready, whether zones are bypassed, if the system is in programming mode and if a trouble

condition exists.

The LCD display of the system status includes descriptions of open zones, alarms, etc. The following are

typical LCD displays:

Arming Display

Description Display

System ready to arm SYSTEM 1 READY

System ready to arm with bypassed zones SYSTEM 1 READY

(BYPASSED)

System not ready to arm due to open perimeter zones SYSTEM NOT RDY

(OPEN ZONES)

System armed, exit delay counting SYSTEM 1 ARMED

011 SEC TO EXIT

System ready for perimeter arming (interior zones open) SYSTEM 1 READY

FOR STAY ARMING

System ready for perimeter arming with perimeter bypassed

zones

SYSTEM 1 READY

FOR STAY (BYPASSED)

System armed, exit delay ended - system is fully armed SYSTEM 1 ARMED

System Perimeter armed, exit delay ended (STAY pressed) SYSTEM 1 ARMED/P

System armed, immediate mode SYSTEM 1 ARMED

IMMEDIATE

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 50 51

Commenti su questo manuale

Nessun commento

Electronics Line 3208GLD Manuale Utente Pagina 14

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Electronics Line 3208GLD