Electronics Line PENTA Manuale Utente Scaricare il pdf (Pagina 8)

-8-

3.8: Event Logs

The event logs record events that the system has undergone since the last arming. If any

events have been recorded in either event log, the System indicator flashes until the

relevant event log has been viewed. In the event that a trouble condition still exists, the

System indicator continues to flash until the condition has been remedied.

Emergency/Trouble Event Log

Zone tamper, bell trouble, keypad trouble, keypad tamper or any of the three distress key

alarms are registered in the Emergency/Trouble event log. If a trouble event occurs,

contact your installer.

To view the Emergency/Trouble event log:

1. Press 4, 2; the various trouble conditions are indicated by the zone indicators.

The following is a summary of the trouble condition that each indicator displays:

1 - System Trouble 2 - Alarm from P key

3 - Alarm from F key 4 - Alarm from E key

2. Press # to exit the event log.

Note: In the event of system trouble, contact your installer.

Zone Alarm Event Log

The Zone Alarm event log displays the zones from which an alarm was generated since

the system was last armed.

To view the Zone Alarm event log:

1. Press 4, 3; an alarm from a specific zone is diplayed by the corresponding zone

indicator.

2. Press # to exit the event log.

Both logs are automatically reset when the system is next armed.

3.9: Follow-me

If your system is not monitored by a central station, either the ‘Follow-me’ or ‘Voice

message’ feature is used to inform you that an alarm has occurred.

When using Follow-me, the system dials the telephone number programmed by the

installer and sounds two beeps. After hearing the two beeps, pressing 3, 6, 9 or # on the

telephone sounds a number of tones to indicate exactly which type of alarm has

occurred. The number of tones indicates the type of alarm generated.

Series of short tones

= Alarm from burglary zone

1 long tone

= F key alarm or alarm from Fire zone

2 long tones

= E or P key alarms, zone or keypad tamper

After the alarm tones have been sounded, pressing 3, 6, 9 or # on the telephone either

causes the panel to hang up or, if additional alarms have occurred, sound another set of

alarm tones.

Note: In the event of system trouble, contact your installer.

Alternatively, when using the Voice message feature, a recorded message announces

that an alarm has occurred. Press 3, 6, 9 or # on the telephone to acknowledge that you

have received the message.

1 2 3 4 5 6 7 8 9 10

Commenti su questo manuale

Nessun commento

Electronics Line PENTA Manuale Utente Pagina 8

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Electronics Line PENTA